What percent is factory window tint?
Factory rear privacy glass is anywhere in between 15% to 20%.
Other articles:
Can you put a tint over a tint?
Yes you can. In fact many customers request this setup to achieve the super dark effect. Be sure to put a few more drops of the slip solution into the mixed solution as the surface of the tint is more tacky then the glass.
Do you need to heat shrink pre cut tint?
If installing our window film on a flat or very slightly contour glass, it does not require heat shrinking. For example, rear windshield for trucks and many side windows on the SUVs, mini vans, and trucks.
If going on a contour glass, for example not all but many side windows for cars and almost all rear windshield for most types of vehicle except trucks, the film needs to be heat shrunk with a heat gun on the outside glass prior to installing it on the inside.
If going on a contour glass, for example not all but many side windows for cars and almost all rear windshield for most types of vehicle except trucks, the film needs to be heat shrunk with a heat gun on the outside glass prior to installing it on the inside.
Does automotive window tinting tint film affect the rear window or back glass defroster?
It will not affect the defroster. In fact, it will improve its performance by trapping more heat to the glass.
What solution do you use to install the automotive precut window tinting tint film?
Mix 3ml (3/5 tsp) of the Filmvantage concentrated application solution or baby shampoo to 32oz bottle clean water.
Do I need to shrink the automotive precut window tinting tint film?
If installing our window film on a flat or very slightly contour glass, it does not require heat shrinking. For example, rear windshield for trucks and many side windows on the SUVs, mini vans, and trucks.
If going on a contour glass, for example not all but many side windows for cars and almost all rear windshield for most types of vehicle except trucks, the film needs to be heat shrunk with a heat gun on the outside glass prior to installing it on the inside.
If going on a contour glass, for example not all but many side windows for cars and almost all rear windshield for most types of vehicle except trucks, the film needs to be heat shrunk with a heat gun on the outside glass prior to installing it on the inside.